Star Tech Development LC-4521 Manual de usuario descargar pdf (Pagina 82)

74 Troubleshooting

Printer does not feed paper

properly.

Jamming paper. Remove all paper from the

printer and then reload it.

The printer is not set up

correctly for the thickness of

paper being used.

Set up the printer for the

paper thickness you are

using. See “Adjusting for

paper thickness” on page 63.

Line spacing is incorrect. Jamming paper. Set up the printer for the

paper thickness you are

using. See “Adjusting for

paper thickness” on page 63.

The line spacing or leading

selected in your application

program is wrong.

Choose a different line

spacing or leading setting

from your application.

Auto line feed with carriage

return is enabled.

Use the EDS Mode or User

Setup Utility to disable auto

line feed with carriage return.

See “Switch 4: Auto LF with

CR” on page 32.

Lines print over each other. Auto line feed with carriage

return is disabled.

Use the EDS Mode or User

Setup Utility to enable auto

line feed with carriage return.

See “Switch 4: Auto LF with

CR” on page 32.

Jamming paper. Set up the printer for the

paper thickness you are

using. See “Adjusting for

paper thickness” on page 63.

Problem Possible Cause Recommended Action

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 114 115

Sin comentarios

Star Tech Development LC-4521 Manual de usuario Pagina 82