Star Tech Development LC-4521 Manual de usuario descargar pdf (Pagina 84)

76 Troubleshooting

Printer case is hot. The printer’s air vents are

blocked or obstructed.

Switch off the printer and let

it cool. Check the air vents

on the bottom of the printer

to see if they are blocked.

Remove the obstruction if

possible. If the problem

persists, return the printer to

your dealer for repair.

Printer makes excessive

noise.

The front cover is removed. Replace the front cover.

The printer is vibrating. Move any objects that are

touching the printer.

Make sure that the printer is

on a level steady surface.

Printer prints past the edge

of the paper.

Incorrect margin settings

are selected by your

application program.

Choose different margin

settings from your

application program.

The paper guide is not

positioned correctly.

Remove the paper and

adjust the position of the

paper guide. Reload the

paper and try printing again.

The ribbon is jammed,

causing the print head to

jam.

Make sure that the ribbon

cassette is installed

correctly. See “Installing the

ribbon cassette” on page 6.

Paper is jamming, causing

the print head to jam.

Remove all paper from the

printer and reload it. Try

printing again.

Set up the printer for the

paper thickness you are

using. See “Adjusting for

paper thickness” on page 63.

Problem Possible Cause Recommended Action

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 114 115

Comentarios a estos manuales

Sin comentarios

Star Tech Development LC-4521 Manual de usuario Pagina 84

Comentarios a estos manuales